Home / Services / Oven, Stove & Range Repair
Appliance Repair

Oven, Stove, and Range Repair in Abilene, TX

Whether it’s an electric oven that won’t heat evenly, a gas burner that won’t ignite, or a range display that’s stopped responding, licensed technicians diagnose and repair ovens, stoves, ranges, and cooktops for both gas and electric models.

What To Look For

Common Symptoms

Oven not heating or heating unevenly

Burner or igniter not lighting (gas units)

Electric burner not heating (electric/coil units)

Oven temperature inaccurate compared to the setting

Control panel unresponsive or displaying error codes

Gas smell near the unit

Self-clean cycle not working

Door not sealing or latching properly

Diagnosis

Likely Causes

An electric oven not heating usually points to a failed heating element (bake or broil) or a faulty temperature sensor. A gas oven or burner that won’t ignite is commonly caused by a failing igniter or a gas valve issue. Uneven heating often traces back to a miscalibrated thermostat or a failing convection fan on units equipped with one. Control panel issues can stem from the control board itself or a wiring connection.

Technician repairing oven and range
Before You Call

Safe Checks You Can Perform

Confirm the unit has power and, for gas units, that the gas supply is on

Check that vents inside the oven aren’t blocked by cookware or foil

Note any error codes displayed on the control panel

What Not to Attempt

Do not attempt to service the gas line, igniter assembly, or internal electrical components yourself. A gas smell is not a DIY situation under any circumstance.

When to Stop Using the Appliance

If you smell gas near the unit, do not attempt to light it, turn off the gas supply if you can safely do so, ventilate the area, and call for service immediately. Also stop use if you notice sparking, exposed wiring, or a burning smell unrelated to normal cooking.

Any gas odor warrants urgent, same-priority service, not standard scheduling.

The Process

How Diagnosis Works

A technician tests the heating element or igniter, gas valve (gas units), thermostat and temperature sensor, control board, and door seal to identify the specific failure point.

Common Repair Categories

Heating element replacementIgniter replacementGas valve repairThermostat / temperature sensor replacementControl board repairDoor seal or hinge replacement
Repair or Replace

Repair Versus Replacement

Most oven and range repairs, including heating elements, igniters, and thermostats, are well below the 50 percent replacement threshold. A control board replacement on a unit already past 13 to 15 years old is worth comparing against replacement cost.

Licensed Technicians

Repairs are completed by licensed technicians. Gas appliance work is completed only by appropriately licensed or certified professionals, as legally required. Any wiring-related issue is handled by a licensed electrician.

Questions

Frequently Asked Questions

Why won’t my gas burner light?

Usually a failing igniter or a gas valve issue. If you smell gas at any point, stop and call for service immediately rather than troubleshooting further.

Why is my electric oven not heating evenly?

Commonly a failing heating element, a miscalibrated thermostat, or (on convection models) a failing fan.

Do you repair both gas and electric ranges?

Yes, both are serviced, with gas-related repairs completed only by appropriately licensed or certified technicians.

Ready to get your appliance fixed?

Oven or Range Acting Up? Let’s Get It Fixed.

Serving Abilene and surrounding communities including Clyde, Merkel, Buffalo Gap, Tuscola, and Hawley.

Call Now: (325) 339-1910